Knowledgebase

Monitor your Debian 10 VPS with InfluxDB, Telegraf, and Grafana Print

  • 0

InfluxDB is a time-series database, which is often used to store performance metrics. When combined with Telegraf collection and Grafana visualization services, it makes an easy performance monitoring solution for VPS cloud server hosting. This tutorial explains how to set up a simple monitoring dashboard with these tools.

Prerequisites

It's good practice to use a firewall such as ufw.

1. Install InfluxDB and Telegraf

Install GnuPG.

# apt-get update
# apt-get install gpg

Download the GPG key and add the repository.

# wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add -
# echo "deb https://repos.influxdata.com/debian buster stable" | sudo tee -a /etc/apt/sources.list.d/influxdb.list

Install InfluxDB and Telegraf.

# apt-get update
# apt-get install influxdb telegraf

2. Configure InfluxDB

Edit the InfluxDB configuration file.

# nano /etc/influxdb/influxdb.conf

Find the section that starts with [http] and uncomment it.

Add these configuration statements to enable the HTTP interface on the loopback address.

[http]
enabled = true
bind-address = "127.0.0.1:8086"
auth-enabled = true
realm = "InfluxDB"

Enable InfluxDB to start at boot and start the service.

# systemctl enable influxdb
# systemctl start influxdb

Open the influx shell.

$ influx

Create an admin user. Replace yourpassword with a secure password.

> CREATE USER admin WITH PASSWORD 'yourpassword' WITH ALL PRIVILEGES

Log in as admin.

> auth
username: admin
password: 

Create a database for Telegraf, and a user with access to the database. Replace yourpassword with a strong password.

> CREATE USER telegraf WITH PASSWORD 'yourpassword'
> CREATE DATABASE telegraf
> GRANT ALL ON telegraf TO telegraf

Create a user for Grafana. Replace yourpassword with a strong password.

> CREATE USER grafana WITH PASSWORD 'yourpassword'
> GRANT READ ON telegraf TO grafana

Verify the users are created.

> SHOW USERS
user     admin
----     -----
admin    true
telegraf false
grafana  false

Exit the influx shell.

> exit

3. Configure Telegraf

Make a backups of the default Telegraf configuration file.

# mv /etc/telegraf/telegraf.conf /etc/telegraf/telegraf.conf.old

Create a new configuration file.

# nano /etc/telegraf/telegraf.conf

Add these lines to the configuration file.

[agent]
  interval = "30s"
  round_interval = true
  metric_batch_size = 10000
  metric_buffer_limit = 10000
  collection_jitter = "0s"
  flush_interval = "10s"
  flush_jitter = "0s"
  precision = "0s"

[[outputs.influxdb]]
  urls = ["http://127.0.0.1:8086"]
  database = "telegraf"
  username = "telegraf"
  password = "yourpassword"

Replace "yourpassword" with the telegraf user password you configured earlier.

You can change the interval setting to reflect how often you'd like Telegraf to collect metrics. The example configuration collects metrics from the inputs you define every 30 seconds.

Add the inputs to the Telegraf configuration file to define the metrics for collection. You can find many examples on the Telegraf docs, but for basic system information, add these lines:

[[inputs.cpu]]
  percpu = true
  totalcpu = true
  collect_cpu_time = false
  report_active = false
[[inputs.disk]]
  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]
[[inputs.diskio]]
[[inputs.kernel]]
[[inputs.mem]]
[[inputs.processes]]
[[inputs.swap]]
[[inputs.system]]

You can also add an interval setting to each input to specify different collection frequencies than the default.

Save and close the file.

Restart the Telegraf service.

# systemctl restart telegraf

Check the service status.

# systemctl status telegraf

4. Install Grafana

Install Grafana's dependencies.

# apt-get install apt-transport-https software-properties-common wget

Add the Grafana GPG key and apt repository.

# wget -qO- https://packages.grafana.com/gpg.key | sudo apt-key add -
# echo "deb https://packages.grafana.com/oss/deb stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list

Install Grafana.

# apt-get update
# apt-get install grafana

Enable and start the Grafana service.

# systemctl daemon-reload
# systemctl enable grafana-server
# systemctl start grafana-server

Grafana should now be running. Unblock TCP port 3000 in your firewall to allow access to the web interface. For the ufw firewall, use:

# ufw allow 3000/tcp
# ufw reload

5. Log in to Grafana

Navigate to http://[your VPS public IP]:3000/, or the server's domain name at port 3000. Log in with the default username "admin", with password "admin". Grafana prompts you to change the default password.

Connect Grafana to the InfluxDB server by clicking Data Sources under the Configuration menu on the left. Select Add data source, and then InfluxDB. Use these configuration options, specifying the username and password that you created earlier for Grafana.

Query Language: InfluxQL 
URL: http://127.0.0.1:8086/
Access: Server
Database: telegraf
User: grafana
Password: yourpassword

Click Save and Test. Grafana should report that your new data source is working.

Use the Explore button on the left to create some graphs. For example, click select measurements and choose mem for memory. Under the SELECT row, choose used_percent. You should now see a graph showing your server's memory usage, using data collected by Telegraf.

Query for RAM usage on Grafana

To make a permanent dashboard choose the Dashboards tab and click Home at the top of the page to see a list of all dashboards.

Conclusion

There are many more input and output plugins available to monitor other applications running on your server. To expand your monitoring system, check the InfluxDB and Telegraf docs.

InfluxDB is a time-series database, which is often used to store performance metrics. When combined with Telegraf collection and Grafana visualization services, it makes an easy performance monitoring solution for VPS cloud server hosting. This tutorial explains how to set up a simple monitoring dashboard with these tools. Prerequisites Deploy a Rcs Debian 10 cloud server instance. Create a sudo user. Update the Debian server. It's good practice to use a firewall such as ufw. 1. Install InfluxDB and Telegraf Install GnuPG. # apt-get update # apt-get install gpg Download the GPG key and add the repository. # wget -qO- https://repos.influxdata.com/influxdb.key | sudo apt-key add - # echo "deb https://repos.influxdata.com/debian buster stable" | sudo tee -a /etc/apt/sources.list.d/influxdb.list Install InfluxDB and Telegraf. # apt-get update # apt-get install influxdb telegraf 2. Configure InfluxDB Edit the InfluxDB configuration file. # nano /etc/influxdb/influxdb.conf Find the section that starts with [http] and uncomment it. Add these configuration statements to enable the HTTP interface on the loopback address. [http] enabled = true bind-address = "127.0.0.1:8086" auth-enabled = true realm = "InfluxDB" Enable InfluxDB to start at boot and start the service. # systemctl enable influxdb # systemctl start influxdb Open the influx shell. $ influx Create an admin user. Replace yourpassword with a secure password. > CREATE USER admin WITH PASSWORD 'yourpassword' WITH ALL PRIVILEGES Log in as admin. > auth username: admin password: Create a database for Telegraf, and a user with access to the database. Replace yourpassword with a strong password. > CREATE USER telegraf WITH PASSWORD 'yourpassword' > CREATE DATABASE telegraf > GRANT ALL ON telegraf TO telegraf Create a user for Grafana. Replace yourpassword with a strong password. > CREATE USER grafana WITH PASSWORD 'yourpassword' > GRANT READ ON telegraf TO grafana Verify the users are created. > SHOW USERS user admin ---- ----- admin true telegraf false grafana false Exit the influx shell. > exit 3. Configure Telegraf Make a backups of the default Telegraf configuration file. # mv /etc/telegraf/telegraf.conf /etc/telegraf/telegraf.conf.old Create a new configuration file. # nano /etc/telegraf/telegraf.conf Add these lines to the configuration file. [agent] interval = "30s" round_interval = true metric_batch_size = 10000 metric_buffer_limit = 10000 collection_jitter = "0s" flush_interval = "10s" flush_jitter = "0s" precision = "0s" [[outputs.influxdb]] urls = ["http://127.0.0.1:8086"] database = "telegraf" username = "telegraf" password = "yourpassword" Replace "yourpassword" with the telegraf user password you configured earlier. You can change the interval setting to reflect how often you'd like Telegraf to collect metrics. The example configuration collects metrics from the inputs you define every 30 seconds. Add the inputs to the Telegraf configuration file to define the metrics for collection. You can find many examples on the Telegraf docs, but for basic system information, add these lines: [[inputs.cpu]] percpu = true totalcpu = true collect_cpu_time = false report_active = false [[inputs.disk]] ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"] [[inputs.diskio]] [[inputs.kernel]] [[inputs.mem]] [[inputs.processes]] [[inputs.swap]] [[inputs.system]] You can also add an interval setting to each input to specify different collection frequencies than the default. Save and close the file. Restart the Telegraf service. # systemctl restart telegraf Check the service status. # systemctl status telegraf 4. Install Grafana Install Grafana's dependencies. # apt-get install apt-transport-https software-properties-common wget Add the Grafana GPG key and apt repository. # wget -qO- https://packages.grafana.com/gpg.key | sudo apt-key add - # echo "deb https://packages.grafana.com/oss/deb stable main" | sudo tee -a /etc/apt/sources.list.d/grafana.list Install Grafana. # apt-get update # apt-get install grafana Enable and start the Grafana service. # systemctl daemon-reload # systemctl enable grafana-server # systemctl start grafana-server Grafana should now be running. Unblock TCP port 3000 in your firewall to allow access to the web interface. For the ufw firewall, use: # ufw allow 3000/tcp # ufw reload 5. Log in to Grafana Navigate to http://[your VPS public IP]:3000/, or the server's domain name at port 3000. Log in with the default username "admin", with password "admin". Grafana prompts you to change the default password. Connect Grafana to the InfluxDB server by clicking Data Sources under the Configuration menu on the left. Select Add data source, and then InfluxDB. Use these configuration options, specifying the username and password that you created earlier for Grafana. Query Language: InfluxQL URL: http://127.0.0.1:8086/ Access: Server Database: telegraf User: grafana Password: yourpassword Click Save and Test. Grafana should report that your new data source is working. Use the Explore button on the left to create some graphs. For example, click select measurements and choose mem for memory. Under the SELECT row, choose used_percent. You should now see a graph showing your server's memory usage, using data collected by Telegraf. To make a permanent dashboard choose the Dashboards tab and click Home at the top of the page to see a list of all dashboards. Conclusion There are many more input and output plugins available to monitor other applications running on your server. To expand your monitoring system, check the InfluxDB and Telegraf docs.

Was this answer helpful?
Back

Powered by WHMCompleteSolution