Knowledgebase

Install Observium on Debian 11 Print

  • 0

Introduction

Observium is a free network monitoring and management platform that supports a wide range of operating systems, devices, and other platforms. Its auto-discovering feature collects data from network devices using Simple Network Management Protocol (SNMP) and stores it in a MySQL database. Furthermore, being a PHP-based platform, it offers an easy-to-use web interface to allow you to monitor the network devices. Some supported platforms and devices are Linux, Cisco, FreeBSD, Windows, Juniper, Brocade, Netscaler, and NetApp. In this article, you will learn how to install Observium on Debian 11 server.

Prerequisites

1. Install and Configure Observium

Update the system packages.

$ sudo apt update

Install all the required packages needed to run Observium.

$ sudo apt install -y libapache2-mod-php7.4 php7.4-cli php7.4-mysql php7.4-gd php7.4-json php7.4-bcmath \
php7.4-mbstring php7.4-opcache php7.4-apcu php7.4-curl php-pear snmp fping rrdtool whois \
mariadb-server mariadb-client subversion mtr-tiny ipmitool graphviz imagemagick apache2 \
python3-mysqldb python3-pymysql python-is-python3

Add Observium system user.

$ sudo useradd -r -M -d /opt/observium observium

Add the user to group www-data.

$ sudo usermod -a -G observium www-data

Download the latest Observium Community Edition installation files.

$ sudo wget http://www.observium.org/observium-community-latest.tar.gz

Unpack the downloaded files.

$ sudo tar zxvf observium-community-latest.tar.gz

Move the extracted files into the /opt directory.

$ sudo mv observium /opt

Copy the default configuration file.

$ sudo cp /opt/observium/config.php.default /opt/observium/config.php

Edit the file for your system.

$ sudo nano /opt/observium/config.php

Modify the file as shown bellow, save and close the file:

// Database config ---  This MUST be configured
$config['db_extension'] = 'mysqli';
$config['db_host']      = 'localhost';
$config['db_user']      = 'observium';
$config['db_pass']      = 'StrongPassword';
$config['db_name']      = 'observium';

Create rrd and logs directory.

$ sudo mkdir /opt/observium/{rrd,logs}

Change the permissions of the directory.

$ sudo chown -R observium:observium /opt/observium/

$ sudo chmod -R 775 /opt/observium/

Edit snmp.conf configuration file to direct the SNMP utilities to use Observium's MIBs.

$ sudo nano /etc/snmp/snmp.conf

Modify the line as shown below, save and close the file:

mibs : /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp

2. Configure MySQL Database

Log in to the MySQL shell. Then, at the password prompt, just press Enter to continue.

$ sudo mysql -u root -p

Create a database named observium.

CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci;

Create a user named observium. Modify the StrongPassword value with your secure password.

CREATE USER 'observium'@'localhost' identified by 'StrongPassword';

Grant all database privileges to the user.

GRANT ALL ON observium.* TO 'observium'@'localhost';

Reload the changes.

FLUSH PRIVILEGES;

Exit MySQL shell.

exit

Insert the default MySQL database schema.

$ cd /opt/observium

$ sudo ./discovery.php -u

4. Configure Apache

Edit the default Apache configuration file.

$ sudo nano /etc/apache2/sites-available/000-default.conf

The final content should be similar to the one below, save and close the file:

<VirtualHost *:80>
    ServerAdmin webmaster@localhost
    DocumentRoot /opt/observium/html

    <FilesMatch \.php$>
        SetHandler application/x-httpd-php
    </FilesMatch>

    <Directory />
        Options FollowSymLinks
        AllowOverride None
    </Directory>

    <Directory /opt/observium/html/>
        DirectoryIndex index.php
        Options Indexes FollowSymLinks MultiViews
        AllowOverride All
        Require all granted
    </Directory>

    ErrorLog  ${APACHE_LOG_DIR}/error.log
    LogLevel warn
    CustomLog  ${APACHE_LOG_DIR}/access.log combined
    ServerSignature On
</VirtualHost>

Change the global server name.

$ sudo nano /etc/apache2/apache2.conf

Add the code below at the end of the file, save and close the file:

ServerName localhost

Enable mpm_prefork module.

$ sudo a2enmod mpm_prefork

Enable mod_rewrite.

$ sudo a2enmod rewrite

Restart the Apache service.

$ sudo systemctl restart apache2

5. Configure Admin Account

Add an initial user with access level 10 for administration. Modify the AdminPassword value with your secure password.

$ cd /opt/observium

$ sudo ./adduser.php admin AdminPassword 10

Create a new file /etc/cron.d/observium to add cron jobs.

$ sudo nano /etc/cron.d/observium

Add the following contents, save and close the file:

# Run a complete discovery of all devices once every 6 hours
33  */6   * * *   root    /opt/observium/discovery.php -h all >> /dev/null 2>&1

# Run automated discovery of newly added devices every 5 minutes
*/5 *     * * *   root    /opt/observium/discovery.php -h new >> /dev/null 2>&1

# Run multithreaded poller wrapper every 5 minutes
*/5 *     * * *   root    /opt/observium/poller-wrapper.py >> /dev/null 2>&1

# Run housekeeping script daily for syslog, eventlog and alert log
13 5 * * * root /opt/observium/housekeeping.php -ysel >> /dev/null 2>&1

# Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data
47 4 * * * root /opt/observium/housekeeping.php -yrptb >> /dev/null 2>&1

6. Access Observium Web Interface

Install UFW.

$ sudo apt-get install ufw -y

Enable UFW.

$ sudo ufw enable

Allow port 80 and ssh through UFW firewall.

$ sudo ufw allow 80

$ sudo ufw allow ssh

To access the Observium Web Interface, go to your browser and visit http://Server_IP/. For example:

http://192.0.2.10/

Conclusion

You have successfully installed Observium on your server. You will get a log-in screen; use admin as your username and AdminPassword as your password. Modify the AdminPassword value with the secure password you entered during setup. You can now access the Dashboard and configure it to begin managing your network.

More Information

To learn more about Observium, go to the official documentation page.

Introduction Observium is a free network monitoring and management platform that supports a wide range of operating systems, devices, and other platforms. Its auto-discovering feature collects data from network devices using Simple Network Management Protocol (SNMP) and stores it in a MySQL database. Furthermore, being a PHP-based platform, it offers an easy-to-use web interface to allow you to monitor the network devices. Some supported platforms and devices are Linux, Cisco, FreeBSD, Windows, Juniper, Brocade, Netscaler, and NetApp. In this article, you will learn how to install Observium on Debian 11 server. Prerequisites Deploy a fully updated Rcs Debian 11 Server. Create a non-root user with sudo access. 1. Install and Configure Observium Update the system packages. $ sudo apt update Install all the required packages needed to run Observium. $ sudo apt install -y libapache2-mod-php7.4 php7.4-cli php7.4-mysql php7.4-gd php7.4-json php7.4-bcmath \ php7.4-mbstring php7.4-opcache php7.4-apcu php7.4-curl php-pear snmp fping rrdtool whois \ mariadb-server mariadb-client subversion mtr-tiny ipmitool graphviz imagemagick apache2 \ python3-mysqldb python3-pymysql python-is-python3 Add Observium system user. $ sudo useradd -r -M -d /opt/observium observium Add the user to group www-data. $ sudo usermod -a -G observium www-data Download the latest Observium Community Edition installation files. $ sudo wget http://www.observium.org/observium-community-latest.tar.gz Unpack the downloaded files. $ sudo tar zxvf observium-community-latest.tar.gz Move the extracted files into the /opt directory. $ sudo mv observium /opt Copy the default configuration file. $ sudo cp /opt/observium/config.php.default /opt/observium/config.php Edit the file for your system. $ sudo nano /opt/observium/config.php Modify the file as shown bellow, save and close the file: // Database config --- This MUST be configured $config['db_extension'] = 'mysqli'; $config['db_host'] = 'localhost'; $config['db_user'] = 'observium'; $config['db_pass'] = 'StrongPassword'; $config['db_name'] = 'observium'; Create rrd and logs directory. $ sudo mkdir /opt/observium/{rrd,logs} Change the permissions of the directory. $ sudo chown -R observium:observium /opt/observium/ $ sudo chmod -R 775 /opt/observium/ Edit snmp.conf configuration file to direct the SNMP utilities to use Observium's MIBs. $ sudo nano /etc/snmp/snmp.conf Modify the line as shown below, save and close the file: mibs : /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 2. Configure MySQL Database Log in to the MySQL shell. Then, at the password prompt, just press ENTER to continue. $ sudo mysql -u root -p Create a database named observium. CREATE DATABASE observium DEFAULT CHARACTER SET utf8 COLLATE utf8_general_ci; Create a user named observium. Modify the StrongPassword value with your secure password. CREATE USER 'observium'@'localhost' identified by 'StrongPassword'; Grant all database privileges to the user. GRANT ALL ON observium.* TO 'observium'@'localhost'; Reload the changes. FLUSH PRIVILEGES; Exit MySQL shell. exit Insert the default MySQL database schema. $ cd /opt/observium $ sudo ./discovery.php -u 4. Configure Apache Edit the default Apache configuration file. $ sudo nano /etc/apache2/sites-available/000-default.conf The final content should be similar to the one below, save and close the file: ServerAdmin webmaster@localhost DocumentRoot /opt/observium/html SetHandler application/x-httpd-php Options FollowSymLinks AllowOverride None DirectoryIndex index.php Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ServerSignature On Change the global server name. $ sudo nano /etc/apache2/apache2.conf Add the code below at the end of the file, save and close the file: ServerName localhost Enable mpm_prefork module. $ sudo a2enmod mpm_prefork Enable mod_rewrite. $ sudo a2enmod rewrite Restart the Apache service. $ sudo systemctl restart apache2 5. Configure Admin Account Add an initial user with access level 10 for administration. Modify the AdminPassword value with your secure password. $ cd /opt/observium $ sudo ./adduser.php admin AdminPassword 10 Create a new file /etc/cron.d/observium to add cron jobs. $ sudo nano /etc/cron.d/observium Add the following contents, save and close the file: # Run a complete discovery of all devices once every 6 hours 33 */6 * * * root /opt/observium/discovery.php -h all >> /dev/null 2>&1 # Run automated discovery of newly added devices every 5 minutes */5 * * * * root /opt/observium/discovery.php -h new >> /dev/null 2>&1 # Run multithreaded poller wrapper every 5 minutes */5 * * * * root /opt/observium/poller-wrapper.py >> /dev/null 2>&1 # Run housekeeping script daily for syslog, eventlog and alert log 13 5 * * * root /opt/observium/housekeeping.php -ysel >> /dev/null 2>&1 # Run housekeeping script daily for rrds, ports, orphaned entries in the database and performance data 47 4 * * * root /opt/observium/housekeeping.php -yrptb >> /dev/null 2>&1 6. Access Observium Web Interface Install UFW. $ sudo apt-get install ufw -y Enable UFW. $ sudo ufw enable Allow port 80 and ssh through UFW firewall. $ sudo ufw allow 80 $ sudo ufw allow ssh To access the Observium Web Interface, go to your browser and visit http://Server_IP/. For example: http://192.0.2.10/ Conclusion You have successfully installed Observium on your server. You will get a log-in screen; use admin as your username and AdminPassword as your password. Modify the AdminPassword value with the secure password you entered during setup. You can now access the Dashboard and configure it to begin managing your network. More Information To learn more about Observium, go to the official documentation page.

Was this answer helpful?
Back

Powered by WHMCompleteSolution